Filter By
Categories
Categories
Colors
Colors
Availability
Availability
Brand
Brand
Mounting screws
Mounting screws
No supplier
Brand: YAESU
3D printed side mounts for YAESU radio, models: FT891With foldable feets. ---Fixing screws are not included --- Other models are also made to order.
Brand: YAESU
Side bars Rails for YAESU FT891 printed in 3D With foldable feets. ---> Mounting screws are not included. <--- We can do other models of side bars protections for other radios by order.
Sidebars Rails for Xiegu G90 with Mic connector protection and foldable feetsMaterial: PETGProduction with 3D Printers ---> Radio and mic not included <------> Mounting screws not included <--- (The correct measure for the mounting screws is M3x8mm)Design and Production by SEVENTECH3D
Sidebars Rails for Xiegu G90 with Mic connector protection and foldable feetsMaterial: PETGProduction with 3D Printers --- Mounting screws are not included ---(The correct measure for the mounting screws is M3x8mm)Design and Production by SEVENTECH3D
Banner
There are 24 products.
Protective side bars for Yaesu FT-991 ham radio With foldable feets that increase the screen 10cm 3D printed Material: PETG Other protection bars can be produced to order, just contact us
Protective side bars for Yaesu FT-450D ham radio With foldable feets that increase the screen 10cm 3D printed Material: PETG Other protection bars can be produced to order, just contact us
Protective side bars for Yaesu FT-450D ham radio 3D printed Material: PETG Other protection bars can be produced to order, just contact us
Protective side bars for Yaesu FT-991 ham radio 3D printed Material: PETG Other protection bars can be produced to order, just contact us
Sidebars Rails for ham radio ICOM IC-7300 IC-9700 Printed in 3D Material: PETG Designed and produced by SevenTech3D
Sidebars Rails for ham radio ICOM IC-7300 IC-9700 Printed in 3D Material: PETG Designed and produced by SevenTech3D
Brand: YAESU
3D printed side mounts for YAESU radio, models: FT817 and FT818 ---Fixing screws are not included by default, if you need it add in on lateral button --- Other models are also made to order.
Brand: YAESU
3D printed side mounts for YAESU radio, models: FT817 and FT818 ---Fixing screws are not included --- ---Radio are not included -- Other models are also made to order.
Brand: YAESU
3D printed side mounts for YAESU radio, models: FT817 and FT818 ---Fixing screws are not included by default, if you want it add on lateral button ------Radio and cover are not included --- Other models are also made to order.
Brand: YAESU
3D printed side mounts for YAESU radio, models: FT857 ---Fixing screws are not included --- ---Radio are not included --- Other models are also made to order.
Sidebars Rails for ham radio ICOM IC-7000 Printed in 3D Material: PETG Designed and produced by SevenTech3D
Brand: YAESU
Sidebars for YAESU amateur radio in "box" format to have greater protection against impacts.Compatible with models: FTM-6000R3D printed (PETG)—> Fixing screws are not included <——> Radio not included <— Other models are also made to order.
